Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This LED combination light kit puts an end to dim, high-draw incandescent setups. Each light uses clear LEDs behind a red lens, providing crisp illumination for stop, turn, tail, side marker, and reflector functions. The low power draw keeps things efficient—only 0.268 amps for stop and turn lights and 0.059 amps for side markers at 12.8 volts. With 23 diodes on the driver’s side and 18 on the passenger’s side, you get strong visibility without ever worrying about replacing fragile bulbs or filaments.
If your trailer ever gets backed down a ramp or runs in wet conditions, these lights are ready for it. The sealed circuit board and waterproof housing protect the internal electronics so moisture can’t damage the LEDs or corrode connections. Designed for marine use, this submersible setup stays dependable trip after trip.
Each rectangular light measures 6-1/16" wide x 3-5/8" tall x 2-1/4" deep and serves seven different functions when properly mounted—stop, turn, tail, side marker, side reflector, rear reflector, and license plate light. The driver’s side includes a built-in license plate light and corrosion-resistant bracket for a clean finish that meets DOT requirements.
Everything you need is in one box. The kit includes both driver and passenger lights, stainless steel mounting hardware with 2" on-center holes, a corrosion-resistant license plate bracket, and a 25' wishbone-style wiring harness with a 4-pole connector made from 20-gauge copper wire. That long harness makes routing easy on trailers up to about 20 feet in length.
The polycarbonate housing and acrylic lenses hold up to road vibration and weather exposure. Since there are no bulbs to burn out and no filaments to snap, these LEDs keep shining bright season after season. They’re backed by a lifetime warranty on the LEDs for peace of mind that lasts as long as your trailer does.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
These particular tail lights are pretty hard to find,for the size I needed,so I found them here as a kit,I actually didn't need nothing but the 2 bulbs.....ordered them,paid $xx extra for UPS shipping,get a email from one of their representatives stating that he upgraded my shipping at no additional cost,after I done paid for premium shipping.....guess what,it still cost me $xx,and their wasn't any upgraded shipping....all in all,great quick responses on emials,emails, my $xx shipping was here in 3days....
My Karavan 12 x 6 trailer lights swap was and correct fit. The extra plate hanger and wires were not needed. I could have used 4 extra wire nuts the left side I hand twisted and Taped.
Lights had every wire they of should had.
Greg
6/11/2019
I returned your lights and the Karavan trailer manufacturer sent me a right light for under 15.00 dollars.
Just installed these today on my fresh water only boat trailer. Replacing my old, incandescent lights with these was a snap. Time will tell how they hold up in freshwater.
E-trailer shipped the product immediately and has excellent communications.
Mark
6/4/2014
Great product one year later. No problems. Substantially brighter than incandescent.
Just installed them and they are great
Fit my boat correctly, worked properly, has a lifetime warranty.
James
3/20/2025
lights are still working fins.
Andrew N.
3/20/2025
Couldn’t be happier! Installation (removal of old bulb-type tail lights) and installed these in under 30 minutes. These lights are SO MUCH BRIGHTER!! Will definitely purchase again. Highly recommend these lights to whoever needs new trailer tail lights.
James
8/22/2022
One year later and these lights have not disappointed. They’re working as well as when installed. Great product, price, shipping and an easy install. What’s not to like?
Look great probally blind the guy behind me now lol .And wouldn't have to replace broken bulbs any more. I used them on a shorlander trailer
etrailer delivers again. Exactly what I expected. After two hitches and several other items, etrailer has become my “go to” all my towing/trailer needs. The generous length of the wiring is appreciated as these lights will be installed so the lights and wiring can be removed & installed in just a few minutes. This trailer is used infrequently and removing the lights and wiring is the only way I can keep the squirrels from chewing the plastic!
After some light disassembly, these fit perfectly under the OEM lens covers of our vintage 1976 apache ramada. LED everything now!
As usual from etrailer, the product is as designed and works as it should. Shipping is slower than amzn and wmrt, but the tech support makes it worth waiting.
Gwendolyn Y.
5/8/2025
Thanks for picking us out of the bunch, Kevin! We'll always be here to help when you need us. Got any more projects lined up for your trailer?
Product worked perfectly. More important; I experienced the best Customer Service
in many years. It seems no Company cares about the customer. Jessica B.
was outstanding. From information, shipping to meet my needs to the follow-up
for delivery. I work for a Fortune 100 company for 32 years our customer service
had not matched this in over 15 years. Thanks for your product knowledge and
making a difference in customer satisfaction. Refreshing !! I will definetly be a returning customer and refer etrailer to my friends.
Inclusive kit which fit well
So far so good. Just installed the lights which was pretty straight fwd. The included in instructions were clear and easy to follow. I did not use the supplied wire splicing nuts since I am installing this on a boat trailer. I opted for soldering and heatshrink, hoping this will withstand saltwater and corrosion better.
Lights are bright and look great. Fingers crossed that they will hold up being dunked in the ocean regularly.
Lights are great quality I love the LED, the only downside is I had to buy my own hardware an connectors because the one you guys send are not good for water, if the connectors were water resistant it would be great an better hardware.
Had everything I needed to complete the job
Finally found led replacements that fits perfectly on my 1985 ez loader trailer!!! They were exactly what I was looking for. They are bright and look awesome!!!!!
The trailer these lights are installed on is used only during waterfowl hunting going into blackish water, swamp water, ice and snow and traveling through 3 states I hunt. I'm going into my second season and all the LEDs are lite.
Haven’t installed yet. I’d get plastic conduit so the wires don’t get chaffed This kit is an upgrade for a 1990 trailer
This is an excellent kit which seems to be a very good quality and is quite easy to install on the trailer. This will permit me back my trailer into the water without having to unplug before getting the lights wet. Also I would advise anyone doing a trailer wiring to keep in mind that if problems arise it most likely is due to a poor ground wire connection. The only problems I had with the lighting installation was due to ground wire not having sufficient contact.
Great product. I had to search a lot of different sites to find this size (roughly 6"x3.5") in a LED package because it had to fit my trailer bracket for the lights. As you can see in the picture the bracket protects two sides of the light so I needed the same size as the old ones. Thankfully eTrailer.com had the kit and it shipped within 24 hours. It bolted right on and everything I needed was included in the kit. Very happy with the product and the order process and shipping time from eTrailer. I would recommend this product to anyone.
Perfect size for small trailers. Arrived fast and in perfect condition.
Also purchased (and installed) two of the the Wesbar LED Trailer Clearance or Side Marker Light w/ Reflector - 1 Diode - Black Base - Amber Lens - 47-222012. Great products.
DURABLE BRIGHT QUALITY. I've taken my trailer and these lights all around North America (California, Yukon, Texas, Key West, Newfoundland) they have never let me down.
Rob
6/21/2022
Bought these lights for my Karavan Double Sea-Doo trailer, excellent lights, better quality than the marina and better quality than the stock ones that came with it. Ver happy with them. All wiring was perfect and durable.
I’d give it 5 stars if the mounting bolts came with flat washers. Used these light as replacement light for the original lights. Mount holes were a little too big to mount without flat washers behind the nut. Great lights
Installed myself for the first time on a trailer and it was all good
The lights came well packaged. All parts were included in a parts bag. I have some doubts as to the quality of the wiring connectors (3M 801). The white grounding wire is too short. I ran two additional lengths of ground wire directly to the lights and eliminated any trailer body induced grounding problems. The stainless bolts were 1/4" and I thought flat washers should have been included along with the stainless lock washers. I went to the local hardware store and purchased 4 each 1/4" flat washers to complete the installation. There was more than enough wire for my small PWC trailer. Installation was straight forward. The lights look very nice and are bright even in the daylight. Worth the purchase price.
Tom S.
10/27/2017
Thanks for the follow up email. Everything is fine and I am satisfied.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Heather A.
3/7/2022
These lights do come individually with part # STL56RB for the passenger side and part # STL57RB for the drivers side.